Driftwood Revival Mirror Frame
This field is required. Please name your mirror.
Measure in inches from each mirror edge to any switch, light fixture, wall, etc. Select 0 if you want frame flush with the mirror's edge on that side.
Your frame can be extended up to 5/8" larger than your mirror on each side.
This field is required.
This field is required.
This field is required.
This field is required.
Are there existing clips or a metal channel on your mirror?
Where are the clips/channel located and how many do you have?
Please select at least one clip/channel location if you have clips or channel holding your mirror, or change your answer above.
Do you have plastic or bulky clips that look like these?
We will send you low profile replacement clips that lay flat on the mirror.
If you have less than 1/2" clearance above your mirror it may result in the replacement clips being visible beyond the top of frame.
Do you have a channel on bottom of your mirror?
Can you fit a coin between the mirror and this channel?
If so, we will route the bottom of the frame to clear the channel.
| Mirror Name: | |
| Mirror: | W - -" H - -" |
| Frame: | W -" H -" |
| Top Clearance: | 0" |
| Left Clearance: | 0" |
| Right Clearance: | 0" |
| Bottom Clearance: | 0" |
| Clips/Channels on Top: | - |
| Clips/Channels on Left : | - |
| Clips/Channels on Right : | - |
| Clips/Channels on Bottom : | - |
| Replacement Clips : | - |
| Channel on Bottom: | - |
| Fit a coin: | - |
Price:
Extend your frame
We can extend the dimensions of the frame up to 5/8" from the mirror's edge if there is enough space, so the frame will completely hide the mirror edge and cover clips around the mirror.
Select 0 if you want frame flush with the mirror's edge on that side.
Additional charges
Due to the overall size of your frame, additional shipping fees will need to be added to ship a frame of that length. To keep your shipping costs at $0 we can splice your frame, allowing us to ship in a shorter box and therefore decreasing the overall cost. Please call us at (800) 311-2163 for further information about how splicing works and/or the extra shipping cost to ship without splicing.
Please verify dimensions selected. Width is normally greater than height.
Between Two Walls
It seems your mirror is very close to the two walls. Please measure the distance from the mirror edge to wall on the top and do the same for the bottom, on both right and left sides. Use the smaller measurement to make sure the frame will fit in the space.
Description
The Driftwood Revival series mirror frame is a rustic weather beaten look inspired by reclaimed driftwood collected from around the country. It is reminiscent of a white-washed, weather beaten board that you might find washed ashore at the beach, revived to live again as a beautiful mirror frame for your bathroom.
The Driftwood Revival bathroom mirror frame is an 3″ Wide x 3/4″ thick MDF with a plastic coating for easier cleaning, better stability, pattern consistency and longevity.
